Harbor Freight Tools Foldable Utility Trailer 90154 - Manual (Page 15)

Page 15 For technical questions, please call 1-800-444-3353. Item 90154
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
A
SSEM
b
Ly
2. To determine where to drill 3/8″ holes in the Stakes,
place the eight Stakes in the eight Stake Clamps (25)
of the Trailer and mark with a pencil. (See Figure N.)
3. Attach the Side Rails and Front End/Back End Rails
to the Stakes, using 3/8″ x 3‑3/8″ Cross Head Bolts,
3/8″ Flat Washers, and 3/8″ Nuts.
4. Secure the stakes to the Stake Clamps (25) of the
Trailer, using 3/8″ x 2‑3/8″ Bolts, 3/8″ Spring Washers,
and 3/8″ Nuts.
5. Attach the Connecting Plates to the
Side Rails and Front End/Back End Rails,
using 3/8″ x 1‑3/4″ Cross Head Bolts and 3/8″ Nuts.
NOTE: For quick folding purposes, you may
not want to bolt down the Stakes permanently
to the Stake Clamps (25) of the Trailer.
3/8″ NUT
3/8″ SPRING
WASHER
3/8″ FLAT
WASHER
3/8″ X 1-3/4″
cROSS HEAD bOLT
3/8″ NUT
3/8″ SPRING
WASHER
3/8″ FLAT
WASHER
3/8″ SPRING
WASHER
3/8″ FLAT
WASHER
3/8″ X 3-3/8″
cROSS HEAD bOLT
STAKE cLAMp
(25)
3/8″ X 2-3/8″
bOLT
cONNEcTING
pLATE
FRONT END
RAIL
bAcK END
RAIL
SIDE RAIL
SIDE RAIL
Figure N: Stake Assembly