Hotpoint Oven - Manual (Page 18)

16
Programmer / Clock
5. Auto symbol appears.
6. The cook time symbol will
disappear from the display.
7. The cook time symbol will appear
on the display.
8.
Fully automatic cooking (example)
For use when a delayed start time is
required.
You want to set the length of cooking
time, and the time for the oven to
switch off. The programmer will
automatically calculate the cooking
start time.
Press the cook time button, then use the
plus a n d m i n u s buttons to set the display
to show the length of cooking time
required - eg; 2 hours as shown (5).
Press the end time button, and the
present ready time will be displayed.
Using the plus and minus buttons you
can set the display to show the actual
time you want the oven to switch off,
eg; 18.00 hours (6.00 pm) (6).
The display will revert to show time of day.
After setting the programmer,
turn the oven control to the
required temperature.
The oven will automatically switch on
at the calculated start time of 16.00
hours (4.00 pm) (7).
A single press of the cook time button
shows the cooking time remaining
before the oven automatically switches
off (8).
A
U
T
O
A
U
T
O
A
U
T
O
A
U
T
O
08 27250 00 - Creda SC11 9/5/05 3:32 PM Page 18