Harbor Freight Tools 34951 - Manual (Page 2)

Page 2 SKU 34951 for technical questions, please call 1-800-444-3353.
specificatiOns
Disc Belt
Size 5” 1” x 30” Motor
1/3 HP, 2.4 A, 110 V~,
60 Hz, Single Phase
Speed 3450 RPM 3350 FPM
Table 4” x 7-1/4” 5” X 5” Weight 17 Pounds
Table Tilt 45° (both)
Dust Chute 1-1/2” (both)
save this Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
iMpOrtant safety precautiOns
warning: When using electric tools, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury, including the following:
reaD all instructiOns BefOre using tHis tOOl
Keep wOrK area clean. Cluttered areas invite injuries.
cOnsiDer wOrK area cOnDitiOns. Don’t use machines or power tools
in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well
lit. Don’t use tools in the presence of flammable gases or liquids.
Keep cHilDren away. All children should be kept away from the work area.
Don’t let them handle machines, tools or extension cords.
stOre iDle eQuipMent. When not in use, tools should be locked up in a dry
location to inhibit rust. If possible, store in an area out of reach of children.
DOn’t fOrce tHe MacHine Or tOOl. It will do the job better and more safely
at the rate for which it was intended.
use tHe rigHt tOOl. Don’t force a small tool or attachment to do the work of a
larger industrial tool. Don’t use a tool for a purpose for which it was not intended.
Dress prOperly. Don’t wear loose clothing or jewelry. They can be caught in
moving parts. Protective, electrically non-conductive gloves and non-skid footwear
are recommended when working. Wear protective hair covering to contain long hair,
preventing it from getting caught in machinery.
1.
2.
3.
4.
5.
6.
7.