Harbor Freight Tools PACIFIC HYDROSTAR 95267 - Manual (Page 2)

Page 2 SKU 95267
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment. Read all instructions
before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords. Always lock up tools and keep out of
reach of children.
4. Do not force pump. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the
pump capacity.
5. Use the right pump for the job. Do not attempt to force a small pump or attachment
to do the work of a larger industrial pump. There are certain applications for which this
pump was designed. Do not modify this pump and do not use this pump for a purpose
for which it was not intended.
Motor 120 V, 60 Hz, 4.7 A (run)
Pump Cord 18 Ft. - 3 Prong Plug
Discharge Size 1-1/2”
Discharge Fittings 1-1/4”, 1-1/2” and 1”
Delivery Height 28.3 Ft.
Flow Rate 3570 GPH
Horsepower
1HP
Operating Temp. 95 Deg. F.
Min. Switch Level 3”
Overall Dimensions 6.5” Dia. x 12.375” H
Housing Material PP Plastic
Pump Weight 13.1 Lbs
Motor Drive Magnetic Drive
Max. Particle Size 1”
Warning: The pump should not be submerged in water deeper than the length of
the power cord, which is 18 feet long.
Safety Warnings and Precautions
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep the
manual and invoice in a safe and dry place for future reference.
Specifications