Humminbird 515 - Manual (Page 58)

53
Select Views
(Advanced)
Select Views sets the available views to either
hidden or visible in the view rotation. The view
will be removed from the view rotation if it is set
to Hidden and will be displayed in the view
rotation if it is set to Visible. The following views
are available:
• Side Beam View (575 Fishfinders only)
• Sonar View
• Sonar Zoom View
• 200/83 kHz Split Sonar View
(575 Fishfinders only)
• Big Digits View
• Self Test
• Accessory Test
NOTE: The Select Views menu choice is only available when User Mode is set to Advanced
(see Setup Menu Tab: User Mode).
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select
Views on the Setup menu.
2. Use the RIGHT 4-Way Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that
can be hidden or made visible. Use the UP or DOWN Cursor keys to
select a particular view, then use the RIGHT or LEFT Cursor keys to
change the View status from Visible to Hidden or vice versa.
Select Views