Getting your appliance ready for use, How to use the display – Hotpoint HMS313I User Manual

Page 7

GETTING YOUR APPLIANCE READY FOR USE

NOTICE

NOTICE
After the appliance has been delivered, stand it in the

After the appliance has been delivered, stand it in the

After the appliance has been delivered, stand it in the
upright position and wait approximately 3 hours be-

upright position and wait approximately 3 hours be-

upright position and wait approximately 3 hours be-
fore connecting it to the electrical outlet to guarantee

fore connecting it to the electrical outlet to guarantee

fore connecting it to the electrical outlet to guarantee
that it operates properly.

that it operates properly.

that it operates properly.
Before placing foodstuffs in the refrigerator or freezer, clean
the interior well with warm water and baking soda.

Motor protection time.

Motor protection time.
This model is provided with a motor protection system.

This model is provided with a motor protection system.

This model is provided with a motor protection system.
Therefore, if the compressor does not start immediately

Therefore, if the compressor does not start immediately

Therefore, if the compressor does not start immediately
after the user has turned it off, do not worry as it will

after the user has turned it off, do not worry as it will

after the user has turned it off, do not worry as it will
start automatically after approximately 8 minutes.

start automatically after approximately 8 minutes.

start automatically after approximately 8 minutes.
Once you have plugged the appliance into the mains socket,
make sure the display is on.

Freezer compartment

Freezer compartment
Turn the appliance on by turning the appliance ON/OFF control
"B"

"B"

"B" clockwise to the required freezer compartment operating
temperature, we recommend you enable the SUPER

SUPER

FREEZE

FREEZE function to speed up the cooling process inside the
compartment; when the latter has reached the optimal tem-
perature, the function will be disabled and you may place
the frozen foods inside the freezer.

Refrigerator compartment

Refrigerator compartment
Turn the refrigerator compartment on by turning the fridge
ON/OFF control "A"

"A"

"A" clockwise to the required refrigerator

compartment operating temperature, we recommend you
enable the SUPER COOL

SUPER COOL

SUPER COOL function to speed up the cooling

process inside the compartment: after a few hours, you may
place food inside the refrigerator.

Temperature settings

Temperature settings
If the compartment concerned is switched off, the word OFF

OFF

will appear on the appropriate space on the display (EEEEE for
the refrigerator and FFFFF for the freezer). If the compartment is
switched on, then the temperatures set at that time will
appear. To change them, turn the appropriate control (A

A for

the refrigerator and BBBBB for the freezer).
The refrigerator compartment can be set to between +2°C

+2°C

and +8°C

+8°C

+8°C, while the freezer compartment can be set to a tem-

perature of between -18°C

-18°C

-18°C and -26°C

-26°C

-26°C. The temperature in

both cases can be increased or decreased by 1°C

1°C

1°C at a time.

When the HOLIDAY

HOLIDAY

HOLIDAY function is enabled, temperature

adjustments cannot be made, but the appliance automatically
sets itself to the best setting for the situation: +12°C

+12°C

+12°C for the

refrigerator compartment (if enabled) and -18°C

18°C

18°C for the

freezer compartment.

How to use the functions:

Function symbol during normal operation.

Function selected (outline flashing).

Function enabled (outline on)

Enabling/disabling the functions

Enabling/disabling the functions
Press the MODE

MODE

MODE button "C"

"C"

"C" as many times as necessary for

the red outline of the function you wish to change to light
up: this indicates that the function has been selected and is
ready to be enabled or disabled. Now you can enable or

How to use the display

disable the selected function using the SELECT

SELECT

SELECT button "D"

"D"

"D".

NOTE:

NOTE: if you do not confirm your selection by pressing the
SELECT

SELECT

SELECT button within five seconds of the last action
performed on the display, the latter will go back to displaying
the function previously set indicating that no change has been
made.
The SUPER COOL

SUPER COOL

SUPER COOL function is linked to the refrigerator.

When the refrigerator is switched off the SUPER COOL

SUPER COOL

function cannot be used:
- see SUPER COOL

SUPER COOL

SUPER COOL function next page.

- see SUPER FREEZE

SUPER FREEZE

SUPER FREEZE function on page 10.

- see HOLIDAY

HOLIDAY

HOLIDAY function, within 'Temperature settings' (left).

The DEMO mode:

The DEMO mode:
To run a demonstration of the display operation while keeping
the appliance turned off, just enable the DEMO

DEMO

DEMO mode.

Enabling

:::::

- set the freezer temperature knob to 00000;
- keep the two buttons “Select

Select

Select” and “Mode

Mode

Mode” pressed for

approximately 5 seconds, until you hear the buzzer and the
two words “OFF

OFF

OFF” and “OFF

OFF

OFF” flash on the display; these

words will flash for the entire duration the DEMO

DEMO

DEMO mode is

enabled.

Disabling

:::::

- set the freezer temperature knob to 00000;
- keep the two buttons “Select

Select

Select” and “Mode

Mode

Mode” pressed for

approximately 5 seconds, until you hear the buzzer and the
two words “OFF

OFF

OFF” and “OFF

OFF

OFF” on the display stop flashing.