HONDA Quicksilver 54 - Manual (Page 11)

2. CONTROL MOUNTING: Refer to pictures on following pages, depending on
the type of ATV you have.
POLARIS COMPOSITE RACK
The mounting of the control panel base to the Polaris rack requires the customer to
remove the tube rail from the front rack as shown.
To mount the controls to the Polaris rack, use:
(2) 1/4” x 1-1/16” x 1-5/8” Square U-Bolts
(2) 1/4” Flat Washers
(2) 1/4” Nylock Nuts
Secure the Control Panel Base to the rack as shown above.
KAWASAKI COMPOSITE RACK
11