Door reversal – Hotpoint FFA84 User Manual
Page 21
Door Reversal
21
CLEANING &
MAINTENANCE
Refit Top Door
22.
Using a thin blunt instrument, remove the hinge
bush cap from the top left of the door and refit on
the top right.
23.
Replace the spacing washers onto the centre hinge
bracket.
Note : You may require assistance to do this:
24.
Place the top door hinge onto the top left of the door, slide the
door onto the centre hinge pin. Support the door while
screwing the top hinge into position.
Ensure that the hinge bracket locates correctly.
25.
If necessary, slacken off the screws on the centre hinge pin and adjust the
doors so that they line up with the cabinet.
26.
Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).
Note : Let the appliance stand upright in it’s final location for at least 15
minutes before plugging in and switching on the electricity supply.