Homelite UT70131 - Manual (Page 8)

8
ASSEMBLY
SILENCER GUARD ASSEMBLY
See Figure 4.
1. Remove silencer guard and two screws from the
owner’s kit.
2. Attach the silencer guard to the rear housing.
NOTE: Make sure the bent end of the silencer guard
fits securely into the opening of the rear housing.
3. Install two screws.
4. Tighten screws securely.
GRASS DEFLECTOR AND BLADE
GUARD USE
See Figure 5.
NOTE: When converting from brushcutter to trimmer, or
trimmer to brushcutter, make sure the correct guard/
deflector is being used.
Fig. 4
BENT END OF SILENCER
GUARD
OPENING IN REAR
HOUSING
SCREWS
SILENCER
GUARD
REAR HOUSING
GRASS DEFLECTOR FOR
STRING TRIMMER USE
BLADE GUARD FOR
BRUSHCUTTER USE
Fig. 5