Homelite UT70131 - Manual (Page 5)

5
SAVE THESE INSTRUCTIONS
Weight Without fuel, cutting attachment ........................................................................................................... 5.48 Kg
With blade .......................................................................................................................................... 5.80 Kg
With string head .................................................................................................................................. 5.67 Kg
Fuel tank volume .................................................................................................................................................... 42.5 cm 3
Cutting swath .......................................................................................................................................................... 457 mm
Engine displacement .................................................................................................................................................. 25 cm 3
Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.75 kW
Maximum rotational frequency of the spindle ................................................................................................... 10,000/min -1
Engine Speed (rotational frequency) at recommended max. spindle rotational frequency ................................. 12,500/min -1
Engine speed (rotational frequency) at idle ............................................................................................. 2,000 - 2,500/min -1
Fuel consumption (in accordance with ISO 8893) at max. engine performance ................................................... 0.48 kg/h
Specific fuel consumption (in accordance with ISO 8893) at max. engine performance ...................................... 0.46 kg/h
Vibration level idling Front Handle ......................................................................................................................... 3.0
Rear Handle .......................................................................................................................... 3.1
Vibration level racing Front Handle ......................................................................................................................... 5.0
Rear Handle ........................................................................................................................ 10.5
Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987) .......................................................... 100
Sound power level (in accordance with ISO 10884) ...................................................................................................... 112
SYMBOLS
TECHNICAL DATA
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in
serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices which may cause property damage.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
Switch On/Off Switch
I = ON to Run
O = OFF to Stop
SYMBOL N A M E EXPLANATION