haier MWM10100GCSS User Manual

Page 12

English

Weight(g)

Display

5.30 Oz

8.80Oz

12.30Oz

15.90Oz

21.00Oz

8.80Oz

12.30oz

15.90Oz

1(About 8.50Oz)

2(About 17.00Oz)

3(About 25.50Oz)

1(About 2.50Oz)

2 (About 5.00Oz)

3(About 7.50 Oz)

7. REHEAT
1) Press ”Reheat” pad , the ”h-1” will display in LED and flash. ”AUTO” indicator will light. (Press the ”Reheat” pad

several times to select the the cooking program you wanted. h-1, h-2, h-3, h-4 will be displayed).

2) Press “Start/+30 Sec/Confirm” key to confirm,the ”h-1” will display.
3) Press ”Reheat” pad , the weight of the menu will be displayed. ”Micro.” and ”AUTO” indicators will light.(Press the

"Reheat" pad several times to select the the weight of cooking food.)

4) Press “Start/+30 Sec/Confirm” key to start cooking. ”Micr.” and ”AUTO” indicators will flash and "Oz" indicator will

go out.

Reheat Chart

h-1

(Auto Reheat)

h-1

(Auto Reheat)

h-1

(Auto Reheat)

h-1

(Auto Reheat)

8. DEFROST BY TIME
1) Press ”Defrost” once, the LED will display ”d-1”.”Micr.” , "

✱✱" indicators will light.

2) Input the figure of the time of cooking.The maximum cooking time is 99 minutes and 99 seconds.
3) Press ”Start/+30 SEC./Confirm” key to start defrosting. ”Micro.” and "

✱✱" indicators will flash.

9. DEFROST BY WEIGHT
1) Press ”Defrost” pad twice, the LED will display ”d-2”. Keep pressing the same key to choose ”d-2”,”d-3”,”d-4”.
2) Input the figure to adjust the weight of food. ”Micr.”, "

✱✱" and "Oz" indicators will light. (The input figure of the weight

should be within 3.50 Oz--70 Oz)

3) Press ”Start/+30 SEC./Confirm” key to start defrosting. ”Micr.” and "

✱✱" indicators will flash and "Oz" indicator will

go out.

10. MEMORY FUNCTION
1) Press ”Memory” to choose memory 1-3 procedure. The LED will display 1,2,3.
2) If the procedure has been set, press ”Start/+30 SEC./Confirm” to use it. If not, continue to set the procedure. Only

one or two stages can be set.

3) After finishing the setting, press ”Memory” to save the procedure and turn back to the waiting state. If press

”Start/+30 SEC./Confirm”, it will save and operate the setting.