Assembly step 7, Assembly step 8, Cse4.5 only) – Horizon Fitness CLUB SERIES CSE 3.5 User Manual

Page 8

BEFORE

YOU
BEGIN

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ASSEMBL

BEFORE

YOU
BEGIN

ELLIPTICAL

OPERA

TION

LIMITED

ARRANTY

TROUBLESHOOTING

MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE YOU

BEGIN

ASSEMBL

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ELLIPTICAL OPERA

TION

CONDITIONING GUIDELINES

TROUBLESHOOTING &

MAINTENANCE

LIMITED WARRANTY

ASSEMBLY STEP 7

(CSE4.5 ONLY)

��

A) Open

HARDWARE BAG FOR STEP 7.

B) Pull

LOWER LINK ARM towards you to acess elbow joint to attach ELBOW COVERS. Once it is in it’s forward

most position, rest the

LOWER LINK ARM on the GUIDE RAIL (as shown).

CAUTION: Be careful to keep the LOWER LINK ARM and LOWER HANDLEBAR aligned with guide rail. Do not

twist them to the left or right while pulling them towards you.

C) Attach

INSIDE & OUTSIDE ELBOW COVERS to elbow joint using 2 SCREWS (L) and 1 SCREW (M) (as shown).

D) Repeat on other side.

ASSEMBLY STEP 8

��

A ) Open

HARDWARE BAG FOR STEP 8.

B) Align

LOWER LINK ARM with U BRACKET.

CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right

while positioning it on the

U BRACKET.

C) Insert 2

TEFLON WASHERS (E) on left and right sides of FOOT PLATE TUBE before sliding SPACER (F) through

U BRACKET and FOOTPLATE TUBE.

D) Insert

FLAT WASHER (C) and BOLT (G) into outside end of FOOTPLATE TUBE to secure LOWER LINK ARM to

PEDAL ARM.

E) Repeat on other side.

��
��
��

HARDWARE BAG FOR STEP 8 CONTENTS :

��
��
��

HARDWARE BAG FOR STEP 7 CONTENTS :

CSE4.5 ONLY

��

CSE3.5-4.5 Elliptical Rev 0.4.indd 14-15

6/3/05 5:42:17 PM