HONDA GC190 - Manual (Page 10)

10 E
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your Emission Control System Warranty (page 12) for
additional information.
The Air Index Information hang tag/label must remain on the engine
until it is sold. Remove the hang tag before operating the engine.
Specifications
GC160
GC190
Tuneup Specifications
Quick Reference Information
Wiring Diagrams
CONSUMER INFORMATION
Honda Publications
Descriptive Term Applicable to Emissions Durability Period
Moderate 50 hours (0–65 cc)
125 hours (greater than 65 cc)
Intermediate 125 hours (0–65 cc)
250 hours (greater than 65 cc)
Extended 300 hours (0–65 cc)
500 hours (greater than 65 cc)
Length x Width x Height 13.3 x 14.5 x 13.0 in
(337 x 369 x 331 mm)
Dry weight 25 lb (11.5 kg)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 9.8 cu-in (160 cm 3 )
[2.5 x 2.0 in (64 x 50 mm)]
Max. output 5.0 bhp (3.7 kW, 5.0 PS) at 3,600 rpm
Max. torque 7.6 ft-lb (10.3 N•m, 1.05 kg•m) at 2,500 rpm
Oli capacity 0.61 US qt (0.58 l)
Fuel tank capacity 0.53 gal (2.0 l )
Fuel consumption 0.51 lb/hph (313 g/kWh, 230 g/PSh)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
Length x Width x Height 13.6 x 14.5 x 13.0 in
(345 x 369 x 331 mm)
Dry weight 29 lb (13.2 kg)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 11.4 cu-in (187 cm 3 )
[2.7 x 2.0 in (69 x 50 mm)]
Max. output 6.0 bhp (4.4 kW, 6.0 PS) at 3,600 rpm
Max. torque 8.9 ft-lb (12.1 N•m, 1.23 kg•m) at 2,500 rpm
Oil capacity 0.61 US qt (0.58 l)
Fuel tank capacity 0.53 gal (2.0 l )
Fuel consumption 0.51 lb/hph (313 g/kWh, 230 g/PSh)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
ITEM SPECIFICATION MAINTENANCE
Spark plug gap 0.028 – 0.031 in (0.7 – 0.8 mm) Refer to page 6.
Valve clearance (cold) IN: 0.15 ± 0.04 mm
EX: 0.20 ± 0.04 mm
See your authorized
Honda dealer
Other specifications No other adjustments needed.
Fuel Type Unleaded gasoline with a pump octane rating
of 86 or higher (page 5).
Engine Oil Type SAE 10W-30, API SH or SJ, for general use.
Refer to page 5.
Carburetor Idle Speed 1,400 ± 150 rpm
Spark plug Type BPR6ES (NGK)
Maintenance Before each use Check engine oil level. Refer to page 5.
Check air filter. Refer to page 6.
First 5 hours Change engine oil. Refer to page 5.
Subsequent Refer to the maintenance schedule on page 5.
Shop
Manual This manual covers complete maintenance and overhaul
procedures. It is intended to be used by a skilled technician.
Available through your Honda dealer or through Helm Inc. at
1 888-292-5395 or visit www.Honda-engines.com > product
manuals.
Parts
Catalog This manual provides complete, illustrated parts lists. Available
through your Honda dealer.
With Oil Alert
SPARK
PLUG IGNITION
COIL IGNITION
SWITCH OIL LEVEL
SWITCH OIL
ALERT
UNIT
Without Oil Alert
SPARK
PLUG IGNITION
COIL IGNITION
SWITCH
POM53483-D.book Page 10 Thursday, March 17, 2005 4:42 PM