Caution, Caution warning warning, Assembly instructions – Harbor Freight Tools 94531 User Manual

Page 6

SKU 94531

For technical questions, please call 1-800-444-3353

PAGE 6

ASSEMBlY INStRuctIONS

Always make sure the Ac Adapter (3) of the Video Doorphone

is disconnected from its electrical outlet prior to assembling

the Doorphone, adding any accessories, or making

adjustments to the product.

Note: For additional information regarding the parts listed in the following pages, refer

to the

Assembly Diagram on page 11.

to Install the Indoor And Outdoor Mounting Plates:

Avoid accidental electrical shock. Before attaching the

Indoor unit Mounting Plate (4) and Outdoor unit Mounting

Plate (7) to the walls, check hidden areas within the walls to

avoid cutting into live electrical wires, gas and water pipes.

Select a location for the Indoor Unit Mounting Plate (4) to be mounted to the inte-

rior wall, preferably, near a 120 volt, grounded, electrical outlet.

ScREW

(5)

WASHER

(5)

WAll ANcHOR

(5)

5 Ft.

INDOOR uNIt MOuNtINg PlAtE

(4)

FIguRE c

Position the Indoor Unit Mounting Plate (4) against the wall, with its large rectan-

gular opening at top, its four mounting prongs facing outward from the wall, and

at a height of five feet from the floor surface.

NOtE: Make sure to use a leveling

device (not included) to ensure the Mounting Plate is straight and level against

the wall.

(See Figure c.)

Using the four small rectangular openings in the Indoor Unit Mounting Plate (4)

as a template, mark the spots where four 1/8” diameter holes will be drilled in the

wall.

(See Figure c.)

Temporarily remove the Indoor Unit Mounting Plate (4) from the wall. Then, drill

the four pre-marked 1/8” diameter holes in the wall.

(See Figure c.)

Insert one plastic Wall Anchor (5) into each of the four pre-drilled holes in the

wall.

(See Figure c.)

cAutION

WARNINg