Unpacking – Harbor Freight Tools 94531 User Manual
Page 5
SKU 94531
For technical questions, please call 1-800-444-3353
PAGE 5
uNPAcKINg
When unpacking, check to make sure all the parts shown on the
Parts list on
page 11 are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
If you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See table A.)
If you are using an extension cord outdoors, make sure it is marked with the suf-
fix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
Make sure the extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified elec-
trician before using it.
Protect the extension cords from sharp objects, excessive heat, and damp or wet
areas.
REcOMMENDED MINIMuM WIRE gAugE FOR EXtENSION cORDS*
(120/240 VOlt)
NAMEPlAtE
AMPERES
(at full load)
EXtENSION cORD lENgtH
25 Feet
50 Feet
75 Feet
100 Feet
150 Feet
0 – 2.0
18
18
18
18
16
2.1 – 3.4
18
18
18
16
14
3.5 – 5.0
18
18
16
14
12
5.1 – 7.0
18
16
14
12
12
7.1 – 12.0
18
14
12
10
-
12.1 – 16.0
14
12
10
-
-
16.1 – 20.0
12
10
-
-
-
tABlE A
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
5.
6.
7.
8.