haier HWM120-01 - Manual (Page 15)

Push the POWER ON/OFF button to switch on the power.
Push the PROGRAM button to select the suitable
automatic program.
Steps of using the operation buttons and description of the steps
After switching on the power, the machine will set to standard program automatically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer to the PROGRAM button in Page 12.
For an example: select quick wash for the quick washing of the laundries with light dirt.
Page 12
Push
PROCESS button to select suitable procedure
After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically. That is the most
common program. To select other program, push the PROCESS button to select one or more procedures
among SOAK WASH RINSE SPIN .
Refer to the
METHOD for the selection. PROCESS SELECTION
Page 12
Do not use the SOAK program
for the woolen laundries.
Wash the laundries that are prone to lose colors
separately from other laundries.
while washing soft laundries such as silk stockings and textile ,
please put into a wash net which can get by shoppong.
Even there's no water in the tub, the
spinning will start after a certain period.
Attention
POWER
ON/OFF
START
PAUSE
WATER
LEVEL PROGRAM RESERVE PROCESS
POWER
ON/OFF
PROGRAM
PROCESS