Nail selection warning, Specifications, Accessories danger – Hitachi Koki USA NR 90GC User Manual

Page 11: Standard accessories, Optional accessories

— 11 —

English

NAIL SELECTION

WARNING

ⅷ Be sure to use only the genuine HITACHI nails for

the NR90GC. The use of any other nails can result
in tool malfunction and/or nail breakdown,
leading to serious injuries.

Only nails shown in the Table below can be driven with
this Nailer.

* This Nailer is not recommended for use with from 3" to
3-1/2" ring shank nails in pressured-treated lumber.

SPECIFICATIONS

Input power source

Single phase: AC120V 60Hz

Charging time

Approx. 60 min.

(At a temperature of 70°F (20°C))

Charging voltage

DC 7.2 V

Charging current

DC 1.6 A

Weight

2.4 lbs. (1.1 kg)

ACCESSORIES

DANGER

ⅷ Accessories other than those shown below can

lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

1 Safety glasses ............................... 1

2 Battery ........................................... 1

3 Charger ......................................... 1

4 Case ............................................... 1

5 Allen wrench for M5 screw ......... 1

OPTIONAL ACCESSORIES

sold separately
⅜ Fuel Cell

Code No. 752-600

⅜ Gas Strip Nailer Lubricant

8 oz. (250 cc) oil feeder

(Code No. 885-246)

NOTE: Accessories are subject to change without any

obligation on the part of HITACHI.

1.Gas Strip Nailer

Dimensions

13-21/32"

Ч 13-29/32" Ч 4-1/4"

Length

× Height × Width

(347 mm

× 353 mm × 108 mm)

Weight

7.7 lbs. (3.5 kg)

Nail capacity

37 nails (1 strip)

Cycle rate

Intermittent: 2 – 3 nails per second
Continuous: 1,000 nails per hour

Battery

EB714S (1.4 Ah)

Ni-Cd battery, 7.2 V

Fuel Cell

Type No. 728-980……sold separately

2. Battery Charger (UC7SD)

NOTE: The charging time may vary according to temperature and power source voltage.

2" (50 mm)

3-1/2" (90 mm)

Paper collated strip nails

Min.

Max.

Clipped-head nails

.266"

(6.8 mm)

.303"

(7.7 mm)

.120"

(3.0 mm)

.131"

(3.3 mm)