beautypg.com

Setting up your air purifier – Hunter Fan 44030-01 User Manual

Page 5

background image

5

©2010 Hunter Fan Co.

44030-01 20100119

figure 1.

seTTIng up your aIr purIfIer

1. Take the Air Purifier out of the box and remove the

clear plastic protective bag and place the unit on a

firm, level surface.

2. Before turning on the Air Purifier, you need to confirm

that the filters are firmly in place and have not become

loose during shipping. To check the filters, push down

on the tab under the handle. Figure 1.

3. Gently pull the rear grill away from the unit and lift

away. Figure 2.

4. The washable Pre-Filter is mounted inside the back

grill of the unit. Confirm that it properly covers the

grill vents.

5. The HEPA Filters will be resting inside the unit. If

present, remove the plastic bag surrounding the filter

and place the filters back into the Air Purifier. The

filters should have arrows on the side to indicate air

flow and the direction the filter should be placed back

into the unit. Figure 3.

6. Set the tab on the bottom of the rear grill into the slot

in the base of the unit and rock the grill up until the

top tab snaps into place. Figure 4.

7. Plug the unit into a 120V electrical outlet.

figure 2.

figure 4.

figure 3.

HEPA Filters

Tab

This manual is related to the following products: