Locke C-125 - Manual (Page 12)

Sulky Attachment (Optional)
To assemble your Sulky Attachment
please use the CL Series Parts Manual as a guide
in addition to this literature.
1. Place the #2 Pivot Tube between the
Pivot Bosses of the Frame Weldment #1. Figure 1
2. Place (1) Spring Bushing #9 in each
Pivot Boss. From the rear, install Pivot Shaft #3
thru the frame and Pivot Gusset #2 lining up the
holes and install the Retainer bolt #18 and secure
with Nut #17. Figure 2
3. Install Seat Spring #6 over Reinforce-
ment #7 and attach with (2) Bolts #20 and (2) Nut
#11. Install the Seat #8 in one of the 3 mounting
holes with #19 and #16. Figure 3
4. Install Tire/Wheel Assembly in order of
Washer #22, Wheel #13, Washer #22, and (2) Nuts
#14. Figure 4
2
9
17
3
9
18
Pivot Tube
Pivot Bosses
Figure 1
Figure 2
8
19
6
16
7
20
11
22
13
22
14
1
Figure 3
Figure 4
9