Hasselblad CF22 CF39 - Manual (Page 32)

1
1
Language
1. Press the MENU button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Press  to select the USER INTERFACE sub-menu.
5. Press either the or button to choose a new language (in
this case Spanish).
6. Press the MENU/EXIT button again to close the menu.
ISO
You are able to set the light sensitivity of the digital back to match
an equivalent ISO rating for standard film.
The ISO rating can be set to 50, 100, 200 or 400.
To set the ISO:
1. Select the
MAIN MENU > ISO entry. This is the top entry of
the top menu, so it will be selected by default when you enter
the menu system. (See also Navigating the Menu System for
details about how to find this setting.)
2. Use the or button to step through the available ISO set-
tings until the setting you want is shown.
3. Either move on to another setting by using the navigator but-
ton or press the menu button to exit the menu system and
keep your setting.

Note that the default sensitivity of the CCD sensor is ISO 50.
Higher ISO settings result in progressively noisier images (just
as higher ISO film becomes more grainy). It is recommended
that you use the lowest ISO setting possible for the lighting
situation.