Hotpoint DC 28 - Manual (Page 3)

2
HOTPOINT DISHWASHER - Instructions for installation and use
D
ISHWASHER
Control panel at your orders
A. ON-OFF Button
Press this button to
switch the appliance on.
B. ON-OFF Indicator light
This light informs you
that the dishwasher is on.
C. Door opening handle
Use this handle to open the
dishwasher door.
D. Cycle selection knob
Turn it to select the
desired wash cycle
E. Extra drying button
Press this button for
greater drying
F. Delayed start select
button
This button delays the
start of the wash cycle
you selected by 12, 9, 6
or 3 hours.
G. Cycle phase and
delayed start indicator
lights
These indicator lights
inform you which cycle
phase is under way
(pre-wash, wash, rinses,
drying) and, if you
How is it made?
E. Upper rack
F. Top spray arm
G. Rack height adjuster
H . Lower rack
Let's open up your dishwasher together
I. Bottom spray arm
J. Salt container cap
K . Washing filter
L. Detergent and rinse
aid dispenser
Technical Characteristics
Learn to get to know the parts which make up
your dishwasher, you will use it better for it.
L
K
I
H
G
E
F
J
have set a delayed
start, they also indicate
the amount of time left
until the wash cycle
starts.
S. Low salt indicator light
This light warns you
that it is time to add
more salt.
T. Low rinse aid indicator
light
This light warns you that
it is time to add more
rinse aid.
A
B
C D
G
S
T
F
E
This dishwasher
conforms to the
following European
Community Directives:
• 73/23/EEC
(Low Voltage) and
subsequent
modifications;
• 89/336/EEC
(Electromagnetic
Compatibility) and
subsequent
modifications.
• 97/17/CE
(Labelling)
Technical characteristics
W idth cm . 44,5
Depth cm . 60
Height cm . 85
Capacity 8 standard place settings
M ains w ater pressure 2,9 psi - 145 psi (20 KPa÷ 1M Pa) (0,2 ÷10 bar)
Pow er voltage 230 V
Energy consum ption 1,95 KW
Fuse (approved to BS1362) 10 A