HP YTH 2242 T - Manual (Page 6)

Transfer and Print Images 4
Printing images
1. Connect the dock to the printer's PictBridge port
(usually on the front of the printer).
2. Set the camera's USB Configuration setting to Digital
Camera (see the camera electronic User Guide).
3. Insert the camera into the camera dock and turn on the
camera. The Print Setup menu displays on the camera. If
you already selected images to print in the camera, the
number of images selected will be shown in the Print
Setup menu. Otherwise, Images: ALL will be displayed.
4. If all the settings in the Print Setup menu look correct,
press the Menu/OK button on the camera to begin
printing. Or, you can change settings in the Print Setup
menu using the arrow keys on the camera, then press
Menu/OK to begin printing.
NOTE: There is a print preview in the Print Setup
screen showing the page layout that will be used for
printing. This print preview updates as you change
the settings for Print Size and Paper Size.
5. When the printing completes, you can leave the camera
in the dock to recharge the camera battery.