Hitachi 50VF820 - Manual (Page 48)

48
On-Scr
een Display
Timers
Set Event Timer
This function will automatically operate the Projection
TV viewing reservation of a program. If the clock is not
set, you can not use this function and the screen below
will appear. The message on the screen will disappear
after 3 seconds, then the screen automatically goes to
the clock setup mode (see page 46).
1. Use the CURSOR buttons
̆
or
̄
to highlight
EVENT 1, EVENT 2, EVENT 3, EVENT 4 and then
press the SELECT button to select. A
Ȟ✔ in the
box means the selected event is enabled.
2. Use the CURSOR buttons
̈
,
̆
or
̄
to highlight
and select START TIME HOUR/MINUTE, AM OR
PM.
3. Use the CURSOR buttons
̈
,
̆
or
̄
to highlight
and select FINISH TIME HOUR/MINUTE, AM or
PM.
4. Use the CURSOR buttons
̆
or
̄
to set MONTH,
DAY and YEAR.
5. Use the CURSOR buttons
̈
,
̆
or
̄
to highlight
and select CABLE or AIR.
6. Use the CURSOR buttons
̈
,
̆
or
̄
to set the
channel the TV will tune to.
NOTE: 1. When the INFO button is pressed, the Event Timer Icon in the bottom right corner of the screen will
display the start time.
2. The OFF TIMER will only activate if the TV was turned on by the ON TIMER and no channel
selection was made after this time. If you change the channel after the ON TIMER has been
activated, the OFF TIMER will deactivate.
3. If no remote control button is pressed after viewing reservation is activated, the TV will
automatically turn off after three hours. Therefore, do not SET EVENT TIMER for more than three
hours if you do not plan to control your television with the remote control.
4. When a CableCARD is installed or removed, EVENT SETTINGS of the CABLE mode are cancelled.
5. When the CLOCK is changed in the SET THE CLOCK function, events are disabled and the check
mark is removed
CAUTION: Do not use your TV as a deterrent when away from home by using the ON and OFF
TIMERS. For safety, the TV should be turned off when you are away from home.
Set Event Timer
Timers
Set Day/Night Timer
Set Sleep Timer
Set Event Timer
Set The Clock
Timers
Move SEL Set
Not Set
Not Set
0:00
-- : -- PST
Move SEL Return
Please Set Clock First
4:11 PM
❑ Event1 : -- : -- AM - ̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event2 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event3 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event4 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
Set Event Timer
Timers
Move SEL Return
4:11 PM
❑ Event1 : -- : -- AM - ̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event2 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event3 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
❑ Event4 : -- : -- AM -
̈ -- : -- AM Jan. 1 2005
Cable -------
OR