Horizon Fitness CT61 - Manual (Page 9)

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
8
ASSEMBLY STEP 2
* Be sure to tighten bolts after all are lined up.
BOLT (B)
LOCK
WASHER (C)
ARC WASHER (D)
ARC WASHER (D)
CONSOLE CABLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 2-F
ASSEMBLED IN STEP 2-D
��������
�����
������
����������
���������������
������
��������������
������
HARDWARE BAG FOR STEP 2 CONTENTS :
A Open HARDWARE BAG FOR
STEP 2.
B With running deck in lowered
position, place CONSOLE
on upright masts. Slide the
brackets that are underneath
the console into the top holes of
the upright masts.
C Place LOCK WASHER (C) and
BOLT (B) into flat side of
LEFT upright MAST and lightly
tighten.
D Place ARC WASHER (D) and
BOLT (B) into curved side of
LEFT upright MAST and lightly
tighten.
E Gently lift RIGHT side of
the console to connect the
CONSOLE CABLE. Carefully tuck
wires in mast to avoid damage.
NOTE: Do not pinch console
cable or grip pulse wires.
F Repeat steps C-D above to
assemble the right side upright
mast and console.
G Tighten all bolts completely.