Harman-Kardon DVD 25 - Manual (Page 25)

CD PLAYBACK 25
CD Playback
Compatibility of Discs
Before you load a disc, make sure that it is com-
patible with the player.
Note that the following discs CANNOT be used
with this player.
■ Laserdisc
■ Pure Data Disc without MP3
■ MiniDisc
To Load and Play an Audio CD
Make sure that you have properly connected the
DVD player:
1. Press OPEN/CLOSE on the front of the DVD
player or on the remote, the disc tray opens.
2. Place a disc gently into the tray with the disc’s
label facing up.
3. Press PLAY to close the disc tray. The DVD
player reads the disc’s table of contents and
the disc starts to play.
4. To search forward or reverse through the
track, press SEARCH (forward/reverse) on the
remote. To pause play, press PAUSE on the
remote or on the front panel. To release the
pause, press PAUSE or PLAY on remote or on
front panel again.
5. Press STOP to stop playback.
■ All playback basics and transport functions are
described in detail on page 15.
Audio CD Playback Features
When playing audio CD’s, your DVD player has
the same features as a CD player, including track
skip, repeat play and programmed playback. The
on-screen Info Display, appearing when REPEAT
or RANDOM is pressed (see page 28), and the
Ez Menu Banner shown below, appearing auto-
matically when the CD is played, let you choose
various playback features.
Track: The number shown indicates the number
of the track that is currently playing.
Brightness: The number indicates the current
setting.
Contrast: The number indicates the current
setting.
Color: The number indicates the current setting.
Bookmarks: Highlight this area and press enter
to set or go to bookmarked locations on a disc.
Time Display Type: This shows the type of time
indication being shown: Time Elapsed or
Remaining for the Current Track, Total Elapsed for
the Disc, or Total Remaining for the Disc.
V-Mode: To optimize the video mode with cer-
tain discs, see page 21.
Using the Banner Display
As soon as a CD is played the Banner Display will
appear automatically. To delete it from screen,
press Ez MENU or CLEAR on the remote, to re-
access it, while the CD is playing, press Ez MENU
again. The Ez Menu Banner cannot be used in
Stop mode, only in Pause or Play mode. In the
Display some of the playback features are illus-
trated with an icon. To access a feature, press the
appropriate ARROW (
M or N) on the remote to
highlight the icon. Each feature is described in
the following pages.
Note:
To see the Ez Menu Banner, you must turn on
your TV and tune it to the appropriate Video
Input Channel.
TRACK BRIGHTNESS COLOR TIME
I I I I
I I I
CONTRAST BOOKMARK V-MODE
TRACK MARK TRACK V
1 0 0 0 OFF 00:00:17 0