Hunter Fan HEPAtech 30240 User Manual

Page 3

41900-01 20100609

1. Clean the outside of the unit with a soft, damp

cloth.

2. At least every 90 days, open the front grill,

remove the carbon pre-filter, and replace it.

This is necessary to maintain proper odor-

removing and overall filtration performance.

If necessary, it can be changed more often.

Mark the new filter installation sticker

included with the new carbon pre-filter and

set the filter calendar dial. Be sure to remove

any plastic wrapping that may be on the new

filter before you place it into the Air Purifier.

3. Every 6 months you should remove the front

grill and check the HEPAtech filter to see if

it needs to be replaced. Compare the color

of the filter to the filter change chart located

above the filter in the air purifier.

ClEANINg ANd FIlTER REPlACEmENT

OPERATINg YOUR AIR PURIFIER

Figure 1.

QuietFlo

Filter

Pre-Filt

Filter

Reset

Front Grill

Pre-Filter

HEPAtech

Filter

Ionizer: Press this button to turn ‘on’ the ionizer.

When the ionizer is ‘on’, the green light near the

button will be illuminated.

On/Speed Control: Rotate the Speed Control

knob to set the desired speed. A

setting of zero (0) indicates that the unit is off,

one (1) is low speed, two (2) is medium speed,

and three (3) is high speed. The fan speed can

be adjusted at any time.

Filter Change Calendar: The filter counter is

designed to optimize the performance of the air

purifer by reminding you when to change the

HEPAtech Filter and pre-filter.

HEPAtech Filter Calendar: The HEPAtech Fil-

ter indicator is located at the top of the calendar

ring. To set the HEPAtech Filter counter, rotate

the calendar ring to align the month that you

installed the filter with the top indicator. Since

the filter is designed for 6 months use, the two

indicators will serve as reminders to change the

filter every 6 months.

Pre-filter Calendar: The inner knob of the filter

counter is the pre-filter counter. To use, align

the knob with the month that you installed the

pre-filter. The replace symbol on the inner knob

points to the month in which you should install a

new pre-filter. The pre-filter is designed for three

months of usage.

Figure 2.