Hunter Fan HEPAtech 30240 User Manual

Page 2

41900-01 20100609

1. This Air Purifier is designed for use on a flat,

level surface and may not work properly on

an uneven surface. ALWAYS place this Air

Purifier on a firm, level surface. ALWAYS

place the Air Purifier at least six (6) inches

away from walls and three (3) feet from heat

sources such as stoves, radiators, or heaters.

2. Place the Air Purifier in an area that is out of

the reach of children.

3. Before using the Air Purifier, extend the cord

and inspect for any signs of damage. DO

NOT use the product if the cord has been

damaged.

4. To reduce the risk of electric shock, this

product has a polarized plug (one blade is

wider than the other) as a safety feature.

This plug will fit into a polarized outlet only

one way. If the plug does not fit fully into the

outlet, reverse the plug. If it still does not

fit, contact a qualified electrician. DO NOT

attempt to defeat or override this safety

feature.

5. ALWAYS UNPLUG the Air Purifier when it

is not in operation, while the filter is being

changed, and while it is being cleaned.

6. DO NOT tilt or move the Air Purifier while it

is in operation. Shut off and unplug before

moving.

7. DO NOT immerse the Air Purifier in water

as permanent damage will occur. Refer to

and follow the CLEANING AND FILTER

REPLACEMENT instructions.

8. DO NOT run the ionizer if tobacco smoke, air

fresheners, dripless wax candles, or grease

from cooking is present.

Thank you for purchasing the HEPAtech™ Air
Purification System from Hunter Fan Company.
You have purchased our latest development in
portable Air Purification Systems. This system
has been developed to improve the quality of
the air you breathe.

Our HEPAtech™ Air Purification System out
performs other air purification systems by

SAFETY INSTRUCTIONS

Save These Important Instructions

1. Remove your air purifier from the box and

take it out of the clear plastic protective bag.

2. Place your HEPAtech™ Air Purification

System on a firm, flat surface.

3. Before turning the Air Purifier ‘on’, you need

to open the front grill. To release the front grill,

place your fingers behind the tabs and pull

forward.

4. The filter will be installed in the correct

position. Grasp the filter and pull it forward.

Remove the plastic wrapping and replace the

filter in the unit. The white filter material should

be facing outward (towards you) and the wire

mesh side should be hidden from view (inside

the unit).

5. Replace the front grill. Be sure that the bottom

tabs are in location first, and then push the top

of the grill forward until it is closed. The unit is

now ready for normal operation.

Note: This unit will not operate unless the door

is placed in the correct position.

6. Plug the unit into a 120V electrical outlet.

INSTRUCTIONS

quickly and effectively removing dust, smoke,
and pollen particles as small as .3 microns in
size. Room air is pulled in through the front grill
where larger particles and odors are caught on
the pre-filter. Smaller particles passing through
the pre-filter are caught on the main filter. The
ionizer helps remove the remaining particles
before being pushed back into the room through
the top vent.

USINg YOUR AIR PURIFIER