Hunter Fan hunter 42027-01 - Manual (Page 13)

12
Hunter Fan Company 42027-01 • 12/09/05
13
42027-01 • 12/09/05 Hunter Fan Company
Installing the Glass Bowl
1. Install three candelabra bulbs (40 Watts maximum each).
2. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may fi nd
the plastic breakaway connector on the end of the extra
chain.)
3.  read the fan pull chain and light pull chain through the
holes in the metal disk.
4. Place the pull chain cap up against the glass bowl. Align the
holes in the cap and glass bowl.
5.  read the fan pull chain and light pull chain through the
appropriate holes in the pull chain cap.
6. Screw the fi nial onto the threaded pipe until tight.
7. Remove the protective wrap from the silhouette on the
light fi xture before starting the fan.
Breakaway
Connector
Steps 1 – 3
Steps 4 – 6
Metal Disk
Silhouette
Glass Bowl
Pull Chain Cap
Finial
Pipe
Attaching  e Pull Chain Pendents
Insert the end of the fan pull chain between
the hooks on the pull chain pendant. Pull
tight to capture the link between the hooks.
Repeat for light pull chain.