Hitachi HTD-K160 - Manual (Page 24)

24
You can search by input the time code.
The time code corresponds to the approximate actual playing
time. For example, to search for a scene 2 hours 30 minutes 20
seconds past the beginning, key in 02:30:20.
Note
• This function is not available for CD and MP3.
STANDBY
DVD
TUNER
AUX 2
5
8
0
SLEEP REPEAT A-B
N/P
MENU/ PBC
SLOW/ MEMORY
Zoom
EQ
Language
AUDIO
Go To
Sub Title
ANGLE
Return DISPLAY
MUTE
SELECT
ADJ/VOL
SETUP TITLE PLAY/PAUSE
OPEN/CLOSE
PROG
LISTENING
ENT
POWER
If the playing disc is DVD
1 Press the GOTO button, the following menu appears on the
TV screen.
TITLE 02 / 05 CHAPTER 001 / 006
2
Use the or button to select title number or chapter
number.
TITLE 02 / 05 CHAPTER 001 / 006
TITLE 02 / 05 CHAPTER 001 / 006
Use the number buttons (0~9 / >10) to input the title or chap-
ter number you want.
3
Press ENTER to play your selection.
4
Follow Step 1, press the GOTO button again to enter time
menu shown as below.
TITLE 02 / 05 TIME - - : - - : - -
5 Use the number buttons (0~9 / >10) to input the time code
you want.
For example, key in 0, 1, 2, 3, 4, 5.
TITLE 02 / 05 TIME 01 : 23 : 45
6
Press ENTER to start playing (from the point of 01:23:45).
7 Follow Step 4, press the GOTO button again to exit.
Note
• If the title number, chapter number or time code you input is not
exist in the disc, the system will not execute your selection
and the selecting menu will exit.
• The selecting menu will time out for a few seconds if you do not
input valid number.
• For some DVDs, this function is ineffective.
If the playing disc is CVD, SVCD or VCD
1 Press the GOTO button.
The time menu appears on the TV screen.
GOTO: - - : - -
2
Use the number buttons (0~9 / >10) to input the time code
you want.
For example, key in 0, 1, 2, 3.
GOTO: 01 : 23
When the last digit is input and the time code is valid, the
system will begin to play (from the point of 01:23).
3 Follow Step 1, press the GOTO button again to exit.
Selecting a Selecting a Selecting a Selecting a Selecting a T T T T Trrrrrac ac ac ac ack Using k Using k Using k Using k Using
Number Buttons Number Buttons Number Buttons Number Buttons Number Buttons
You can select a track directly using the number (0~9 / >10)
buttons.
• In AUX mode, this button is useless.
• In Tuner mode, use this button to enter station number directly.
• In DVD mode, use this button to enter tilte, chapter or track
number to select it directly, or key in password to unlock the
parental control function in setup menu.
Note
• If the PBC function is set to on, you cannot select the track on
the CVD, SVCD or VCD2.0 using number buttons directly. About
PBC, see page 21.
Selecting a Star Selecting a Star Selecting a Star Selecting a Star Selecting a Start P t P t P t P t Point Using the oint Using the oint Using the oint Using the oint Using the Time Code Time Code Time Code Time Code Time Code