Harbor Freight Tools Chicago Electric Power Tools 12 Volt Rechargeable Grease Gun 92196 - Manual (Page 10)

1. Release the Follower Rod (22) from the slot on the end cap of the Grease Tube
(2) to allow the Follower Rod to move forward into the Grease Tube
(See Figure B.)
2. Push the Follower Handle (19) forward while depressing the Vent Valve (13).
(See Figure D.)
3. Squeeze the Switch (18) several times to operate the Grease Gun until the
trapped air is expelled. Then, push the Follower Rod (22) all the way into the
Grease Tube (2). (See Figure D.)
TO EXPEL AIR POCKETS
GREASE TUBE
(2)
SWITCH
(18)
FOLLOWER ROD
(22)
FOLLOWER HANDLE (19)
FIGURE D
VENT VALVE
(13)
TO PRIME THE GREASE GUN
1. Squeeze the Switch (18) until grease flows smoothly from the Coupler (14). If
necessary, depress the Vent Valve (13) to expel air pockets. (See Figure D.)
COUPLER
(14)
TO OPERATE THE GREASE GUN
1. Attach a fully charged Battery Pack (3) to the Grease Gun. (See Figure C.)
SKU 92196 For technical questions, please call 1-800-444-3353 PAGE 10