Hitachi 50UX58K - Manual (Page 38)

AUDIO - 38 -
Audio Settings Menu
Use CURSOR or to highlight the function to be adjusted.
Press CURSOR or to adjust the function.
Press EXIT to quit menu.
NOTE: If BASS is selected you are adjusting BASS. The additional menu items TREBLE and BALANCE
can be selected and adjusted in the same manner.
BASS
This function controls the low frequency audio to all speakers.
TREBLE
This function controls the high frequency audio to all speakers.
BALANCE
This function will control the left to right balance of the TV internal speakers, the AUDIO TO HI FI output,
and WIRELESS OUT output, and the Surround Speakers.
RESET
When RESET is selected, press CURSOR to return audio adjustments to factory preset conditions.
ADVANCED SETTINGS
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening
conditions.
Advanced Audio Settings Menu
Press CURSOR or to highlight a function. Press CURSOR to change the function setting. When
the function has an "X" in the box, it is ON.
MTS MODE
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural
sound) used when receiving a weak stereo broadcast or SAP (second audio program) which may be a
secondary language, weather report, etc.
The sources received will be displayed at the top center edge of the TV. The source you select will be
displayed above the sources received. See example below for each selection when both stereo and
second audio are received (monaural is always received).
STEREO SELECTED SAP SELECTED MONO SELECTED