Homelite UT44160 - Manual (Page 13)

Page 1
 If blades do become jammed, stop the motor, allow the
blades to stop, and disconnect the plug from the power
source before attempting to remove the obstruction.
 If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge. Stretch a
piece of string along the hedge at the desired height.
Trim the hedge just above the guide line of string. Trim
the side of a hedge so that it will be slightly narrower at
the top. More of the hedge will be exposed when shaped
this way, and it will be more uniform.
 Wear gloves when trimming thorny or prickly growth.
When trimming new growth, use a wide sweeping action,
so that the stems are fed directly into the cutting blade.
Older growth will have thicker stems and will be trimmed
easiest by using a sawing movement.
OPERATiNg ThE hEdgE TRiMMER
WARNiNg:
Read the safety information for safe operation using the
blade. Extreme care must be taken when using blades
to ensure safe operation. Refer to Important Safety
Instructions and Specific Safety Rules.
 Hold unit firmly with both hands. Always keep your left
hand on the telescoping pole and your right hand on the
rear handle. The unit is used for cutting in either direction
in a slow, sweeping action from side to side.
 Stand so that you are stable and balanced on both
feet.
 Inspect and clear the area of any hidden objects.

To protect yourself from electrocution, do not operate
within 50 feet of overhead electrical lines.
 Never use the hedge trimmer near power lines, fencing,
posts, buildings, or other immovable objects.
 Never use a blade after hitting a hard object without first
inspecting it for damage. Do not use if any damage is
detected.
OPERATiON
Fig. 8