beautypg.com

Stopping the engine – Harbor Freight Tools Pacific Hydrostar 1-1/2" Gasoline Powered Clear Water Pump 68328 User Manual

Page 12

background image

Page 10

For Pump technical questions, please call 1-800-444-3353.

Item 68328

For Engine technical questions, please call 1-800-520-0882.

IMPORTANT:  Allow the engine to run at no load for five minutes with no 

load after each start-up so that the engine can stabilize.
6. Adjust the Throttle as needed.
7.

break-in Period:
a. Breaking-in the engine will help to ensure proper equipment and engine operation.
b. The operational break-in period will last about 3 hours of use. During this period:

•  Do not apply a heavy load to the equipment.
•  Do not operate the engine at its maximum speed.

c. The maintenance break-in period will last about 20 hours of use. After this period:

•  Change the engine oil. Note: Failure to change the oil regularly may damage the engine and void the warranty.

Under normal operating conditions subsequent maintenance follows the schedule

explained in the MAINTENANCE AND SERVICING section.

Stopping the Engine

1. To stop the engine in an emergency,

turn the Engine Switch off.

2. Under normal conditions, use the following procedure:

a. Slide the Throttle to SLOW (the “turtle”).

b. Turn the Engine Switch off.

O

O

I

I

b

a