Programming, On-screen display (osd) – Honeywell HCD484L User Manual
Page 13
Rev 2
8
G-113079-002
02/07
Eng
lish
Programming
On-Screen Display (OSD)
Press MENU briefly to confirm the current operation setup.
The information (see
Figure 8
) disappears after a few
seconds if there is no button action.
Even though the OSD message disappears, the Camera ID
or Title continues to display, if selected in the CAMERA ID
sub-menu. To turn off the Camera ID or Title, either:
•
With external communication, change the display
position. Options are
Bottom right, bottom left, top left, top right, non-display
•
If you do not need to display the Operating OSD (for
example, for an external text overlay board), set it to
OFF at all times through a remote control using an
RS485 connection.
Figure 8
OSD Information Display
CAMERA ID/TITLE
Back Light
WB Mode
Back Light displays if BLC is enabled (see
.
Shutter Speed displays if the default shutter speed is
changed.
WB Mode always displays.
Shutter Speed