Heatcraft Refrigeration Products BN-PL0208 - Manual (Page 32)

32 February 1, 2008 Bohn Refrigeration Products List Prices
Low Profile & Low Velocity* Medium Profile High Profile**
All Models
Beacon II™
Adder
All Models
Beacon II™
Adder
All Models
Beacon II™
Adder
ADT 1,280 BMA 2,032 BHA 3,830
LET 1,280 BME 2,032 BHE 3,830
LLE 1,280 BML 2,032 BHL 3,830
HGT - BMG - BHG -
LO - BMF - BHF -
LOD -
LOG -
WK 1,280
WKE 1,280
WKG -
SM 1,280
SME 1,280
HR -
Maximum 4 Evaporators per condensing unit List Price ($US)
Beacon II™ Smart Controller – Part # 89704301 2,060
Beacon II™ “Smart II” Software – Part # 89704101 589
Communication Hub – Part # 89708001 6,163
Beacon II ™ Refrigeration System
Part #
Smart
Controllers
Communication
Hub
Timer Modem Alarm Light List Price ($US)
89759001 4 1 1 1 1 27,127
89759002 3 1 1 1 1 25,141
89759003 4 1 0 0 0 23,660
89759004 3 1 0 0 0 21,819
* Beacon II™ not available 460V and 230/3V
** The following models require special split circuiting for use with Beacon II system.
Please contact factory for pricing:
- Air defrost (BHA): 1610, 2440, 200, 2780
- Electric defrost (BHE/BHL with 404A): 1220, 1390, 1860, 2120
- Air defrost (BHA with 404A): 1900, 2160, 2200
NOTE: Beacon II™ must be ordered as a system
When ordering a Beacon II™ system, please advise the box
temperature, liquid temperature and refrigerant so that
the proper evaporator nozzle can be installed.
When applying an electric defrost coil in a medium
temperature application the nozzle size is critical and
must be evaluated. For assistance, please call a factory
representative.
Beacon II™ Pricing ($US)
NOTE: One Smart Controller™ can control
up to 4 condensing units with a maximum
of 4 evaporators each.
Beacon II™ Communication Center
™
Beacon II™ is the first pre-assembled refrigeration system with factory tested and
mounted components, featuring an integrated microprocessor electronic control
board, preset for standard applications.
System Features and Benefits:
Beacon II™ Smart Controller:
• Remote Access Capabilities
• Smart Defrost
• System monitoring, programming and data
logging (with Smart II software)
• Large, easy to read display
Communication Hub
• Allows single point communication and control to
up to 4 Smart Controllers™ and includes:
4 - 6ft. null modem cables
4 - Serial ribbon cables
1 - Communication hub
1 - 24 VAC power supply
1 - Instruction sheet
• Up to 16 Smart Controllers™ can be networked
to a computer or modem using multiple hubs
Factory Mounted Components
• Beacon II™ microprocessor
• Solid state temperature sensors
• Electric expansion valve
• 24-volt transformer, fan cycling relay
• 24-volt compressor contactor
• Pressure transducer
Benefits
• Simplifies installation
• Increased system efficiency
• Increased system reliability
• Reduced installation time/cost
• Used with single or multiple
evaporator applications
Components Eliminated
• Liquid-line solenoid
• Room thermostat
• Thermal expansion valve
• Defrost time clock
• Defrost termination/fan delay switch
• Defrost and fan contactors, if necessary