Hitachi 42PD8800TA User Manual

Page 30

MENU OPERATION (continued)

Picture Menu (TV/AV mode)

In this menu, you can make speciﬁ c adjustments for the picture based on your preference.
By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.

Selected Items

Setup hint

Picture Mode

Dynamic

You can make the better selection from 3 modes
depending on the lighting condition and intended use.
Dynamic: Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.

Natural

Cinema

Contrast*

-31 +31

(+32 +40)

This adjusts the contrast to meet the lighting environment
by using ◄►.

The maximum value can be extended to [+40] by

pressing and holding ► button at [+31], which changes
the color between those numbers from green to
magenta. This is the special feature prepared for the
dark scene. At the normal condition, it is recommended
to set the value less than [+31].

Brightness*

-31 +31

With this function, black is adjusted to change the overall
brightness by using ◄►.

Color*

-31 +31

It can adjust color density based on your preference by
using ◄►.

Sharpness*

-15 +15

Preferred sharpness can be adjusted by pressing ◄
button for Softer image or ► button for Sharper image.

Tint*

-31 +31

Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
color. This is not available (grayed out) when receiving
PAL/SECAM signal.

Color Temperature*

Cool

You can select from 4 settings (default) depending on the
color condition with ◄► buttons.

Normal

Warm

Black/White

Picture
Picture Mode

Dynamic

Contrast +31
Brightness –31
Color 0
Sharpness +15
Tint 0
Color Temperature

Normal

Contrast Mode

Normal

Reset

Select OK Set Return

Picture Dynamic
YNR

Off

CNR

Off

Film Mode

3D Comb Filter

Off

LTI

Off

CTI

Off

Black Enhancement

Off

Auto Color

Off

Reset

Select OK Set Return

Picture Dynamic
Color Temp. Adjust
Color Management
Color Decoding
Select OK Set Return