Hi-Touch Imaging Technologies Mug Heat Press Kit - Manual (Page 19)

18. Wait until the temperature of mug cools down, then remove the mug
locating tape.
Useful Tips:
(1). Peel the photo off immediately while heating completed, can get ultimate output.
(2). Avoid burning from touching, please wear glove.
(3). Avoid double-image, don’t stick the photo on the mug again.
(4). A photo only can transfer one Mug
19. The whole heating process is completed. You can stop or start from the
beginning and repeat the whole procedure to create a new personalized
mug.
Note:
Smokes may come out from the Mug Heat Press during the heating
process. The phenomenon is normal due to the water is been evaporating
during the heating process.