haier XQB60-68 - Manual (Page 14)

Selection method of the procedure programs
Times of pushing
the "Process
Selection" button
Selected procedure
program
Applicable procedure
Contents (the lighted indicators
indicate the programs about to run)
Wash, rinse, spin
(standard program)
Rinse, spin
Spin
(spin after drain)
Wash (the washing
liquid remains in
the tub)
Wash, rinse ( the
rinsing liquid remains
in the tub)
When the common laundries
need washing , rinsing and
spinning
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Twice-wash, wash,
rinse, spin
Repeat using the washing
liquid
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
When the laundries need
only spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "Twice wash" program
for the woolen laundries.
Wash the laundries that are prone to
lose colors separately from other laundries.
The pulsator will not rotate unless the water is filled to selected water level.
Attention
Quick-wash, wash,
rinse, spin
When quickly wash the
light dirty laundries.
Quick-
wash
Quick-
wash
Quick-
wash
Quick-
wash
Quick-
wash
Quick-
wash
Quick-
wash
Twice-
wash
Twice-
wash
Twice-
wash
Twice-
wash
Twice-
wash
Twice-
wash
Twice-
wash
If you push the "Process Selection" button for 7 times, it will resume the original mode, and
it will circulate like that.
If you select the "Quick wash" program, you have to set the full procedure of wash, rinse
and spin. The procedure cannot be selected.