HP C500 - Manual (Page 30)

Adjusting the Camera Settings
HP PhotoSmart C500 Digital Camera User’s Guide 59
To manually adjust the white balance setting:
1. Turn the camera on and turn the camera mode dial to Rec.
2. Press the Menu button.
3. Use the 4-way arrow button to scroll to the Photo Assist menu, then
scroll down to White Balance.
4. Press the Edit button (left soft key).
5. Use the 4-way arrow button to select a white balance option.
6. Press the Select button (left soft key).
7. Press the Exit button (right soft key) twice to save the settings and exit the menus.
Setting Select this option when
Auto You want the camera to automatically sense the lighting conditions and
adjust the white balance appropriately for optimum color reproduction in
your photo. Auto is the default.
Daylight You are taking a photo in daylight without artificial lighting.
Fluorescent You are taking a photo under fluorescent light.
Tungsten You are taking a photo under normal incandescent light, such as the light
from tungsten filament light bulbs in household lamps.
Flash You are using the flash to illuminate the subject.