Harbor Freight Tools 93033 - Manual (Page 3)

Page 3 SKU 93033 For technical questions, please call 1-800-444-3353.
ATV Motorcycle Jack periodically, and if damaged, have it repaired by an authorized
technician. The handle and pedals must be kept clean, dry, and free from oil and grease
at all times.
10. Stay alert. Watch what you are doing, use common sense. Do not operate the ATV
Motorcycle Jack when you are tired.
11. Check for damaged parts. Before using any product, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts or
mounting fixtures; and any other condition that may affect proper operation. Any part that
is damaged should be properly repaired or replaced by a qualified technician. Do not
use this product if the Lifting Frame (2) doesn’t work properly.
12. Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool.
13. Do not operate ATV Motorcycle Jack if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the ATV Motorcycle
Jack
14. Maintenance. For your safety, maintenance should be performed regularly by a qualified
technician.
Additional Safety Warnings and Precautions
1. Only operate this product on a flat, dry, level surface, capable of supporting the weight of
this product and the load.
2. Do not attempt to lift equipment greater than the 1500 Lbs. maximum capacity.
3. Always use good quality hydraulic oil in the Jack. Do not mix various oils, and when
filling the Jack, make sure no dirt or debris enters the hydraulic system.
4. Once a load is elevated, do not move the ATV Motorcycle Jack. The wheels on this
product are designed to move the ATV Motorcycle Jack without a load.
5. Always engage the Stop Bars (33 and 35) when lifting a vehicle. See FIGURE 2 on
page 5.
6. Lower the load slowly, in a controlled fashion. Never allow the load to drop quickly.
7. Never allow anyone to ride on this product when it is being raised, lowered, or while
holding a load.
8. Keep fingers and hands away from the Lift Arms (4 and 6) when raising or lowering.
Keep onlookers and children a safe distance during operation.
9. Use tie-down straps (not included) to secure the load.
10. This is a temporary lifting device only. It is not designed to support loads for extended
periods of time.
11. Before each use, check for hydraulic oil leaks; never operate the Lift if leaks are present.