Homelite ELECTRIC GENERATOR - Manual (Page 8)

Usage of Generator
To keep generator in optimal condition mechanically and electrically, the following points shall be
observed
1. The total power of electric load shall not exceed the rated power of the generator
2. If generator is to be wired for house power supply, wiring shall be carried out by an electrician.
Check to make sure all wiring is correct. Wrong wiring will cause damage to the generator and
even a fire.
3. Ground generator before use.
USE OF AC
1: Ground generator by attaching ground wire to ground terminal. The other end of the ground
wire should be attached to a grounded object or attached to a grounded metal spike.
2: Start the engine using “Starting Generator” procedure on previous page .
3. Connect needed devices to the AC Outlet Terminals.
4. Turn voltage switch to 120V or 240V depending on needed voltage.
5. Turn AC Circuit breaker to “ON” position.
Note: Overcurrent will automatically turn off the AC breaker. When breaker is tripped to
“OFF” position, reduce load and re-start a few minutes latter.
Voltage switch
AC Circuit Breaker
AC Outlet Terminals
8
Ground Terminal