Homelite ELECTRIC GENERATOR - Manual (Page 7)

Starting the Generator
1. Remove (unplug) all loads from the AC outlet Terminals.
2. Turn the AC circuit breaker to the “OFF”
position
3. Turn the fuel valve to the “ON” Position.
4. Turn the Choke lever to the “CLOSED” position.
5. Turn the engine switch to “ON”.
6. Gently pull the starting pull handle until some resistance
is felt and then pull it abruptly.
7. Once engine has warmed up, turn the choke lever to the
“OPEN” position.
Fuel Valve
AC Circuit Breaker
AC Outlet Terminals
On/Off Switch
Start Pull Handle
Choke Lever
CLOSED
OFF
Choke
ON
OPEN
7