Hasselblad 949 - Manual (Page 15)

1
Unmounting the Slide Feeder
To unmount the feeder, you must always use the software-guided
procedure below to ensure that the scanner drum and the magazine
drawer are positioned correctly before detaching.
Turn on the scanner and launch the FlexColor software.
Select
Maintenance > Feeder from the menu bar.
The Feeder window opens.
Press the Unmount button. The feeder will move the slide magazine
drawer into storage position
FlexColor displays the
Mount feeder window.
As instructed in the window, open the magazine drawer by grasping
it at the top and pulling it down. Then click Continue to go on to the
next step.
1.
2.
3.
4.