Harbor Freight Tools 98135 - Manual (Page 9)

Page 9 SKU 98135 For technical questions, please call 1-800-444-3353.
maintenance and
servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
tO prevent
seriOus injurY
FrOm accidental
OperatiOn:
turn OFF the power to the
Fuel transfer pump before
any inspection or
maintenance is performed.
tO prevent seriOus
injurY FrOm pump
Failure:
do not use damaged
equipment. if abnormal noise,
vibration, or leakage occurs,
have the problem corrected
before further use.
cleaning, maintenance, and
lubrication
BeFOre eacH use, 1. inspect the
general condition of the Pump.
Check for loose screws, loose or bro-
ken electrical wiring, and any other
condition that may affect its safe
operation.
Maintain labels and nameplates on
2.
the pump. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
aFter use,
3. clean external surfaces
of the Pump with clean cloth.
To keep Fuel Transfer Pump running 4.
at its best, flush with diesel fuel if it is
to be stored for long periods of time.
Remove and clean Screen (25) after
5.
every 20 hours of continuous opera-
tion. Cleaning frequency depends
on the type and cleanliness of fluids
being pumped.
For safety reasons, service and main-
6.
tenance should be performed regu-
larly by a qualified technician.