Harbor Freight Tools 98135 - Manual (Page 8)

Page 8 SKU 98135 For technical questions, please call 1-800-444-3353.
OperatiOn
this Fuel transfer
pump must be set
up according to all
“installation and connection”
information on pages 6 thru 8
of this manual.
to reduce build up of static
electricity and possible fire
and/or explosion, do not wear
synthetic fibers while using
this Fuel transfer pump.
Maintain nozzle contact with neck of 1.
container being filled to reduce static
electricity buildup.
On initial start-up it may be necessary 2.
to hold the Nozzle (54) open a few
seconds to allow pump to prime.
Remove Nozzle (54) from Pump and
3.
insert into neck of tank, barrel, drum
or fuel cell.
Begin fueling by squeezing lever on
4.
nozzle (54).
Warning: the pump motor is
5.
equipped with thermal overload
protection. if overheated, it will
shut itself off without any damage
to the electrical system. Be sure
to turn off the pump power if this
occurs. as the motor cools, it will
start without warning if the power
is left on.