Harbor Freight Tools 66552 - Manual (Page 4)

SKU 66552 For technical questions, please call 1-800-444-3353. Page 4
speciFications
Weight Capacity 350 lb.
unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
asseMblY
read the entire iMportant
saFetY inForMation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Make sure rubber end caps are se-
1.
cured into feet of Base (2).
Steps 2 and 3 Steps 6 and 7
Steps 4 and 5
U-Shaped
Bracket
Pedal
Long
Bolt
2. Insert Long Bolt (6) through:
Washer (9); •
One hole in U-shaped Bracket un- •
der Saddle (1);
Bushing (10);
•
Hole in end of Pedal (3); •
Bushing (10); •
Other hole in U-shaped Bracket; •
Washer (9). •
Secure Long Bolt
3.
with a Lock Nut (8).
Insert Short Bolt (7) through:
4.
Washer (9); •
Mounting Bracket (5); •
Washer (9); •
Remaining hole in Pedal (3); •
Washer (9); •
Remaining Mounting Bracket (5); •
Washer (9). •
Secure Short Bolt with a Lock Nut (8).
5.
Insert remaining Short Bolt (7) 6.
through:
Washer (9); •
Release Bar (4); •
Washer (9); •
Remaining hole in Mounting Brack- •
et (5);
Washer (9);
•