haier WQP4-1A - Manual (Page 9)

Program
OPERATION INSTRUCTIONS
Program selection
1. There are six types of washing program available for selection, which are normal wash, intense wash, prewash, normal wash with
drying, intense wash with drying and prewash with drying.
2. Press the On/Off switch and then indicators for drying and standard wash illuminate.
3.Check the conditions of the dishes and make sure whether a drying process is necessary or not before selecting the washing
program.Press the select button and a beep can be heard, indicating a program with drying process is selected. The rated duration
is shown in table1.When press the button twice,two beeps can be heard, indicating a program without drying process is selected.
The rated duration is shown in table 2.
4.The program can't be reset when the appliance is in operation. To reset the program, shut off the power supply and repeat the
program selection.
Table 1
Cleanliness
Normal
Dirty
Rinse and
d r y i n g
only
Preparation
About
60Sec.
Pilot lamp
The indicator for standard wash
blinks.The indicator for drying
blinks during drying process.
Washing time
Wash Rinse 1 Rinse 2 Drying
Duration
About12Min.
About20Min.
About3Min.
About6Min.
About20Min.
About20Min.
About20Min.
About6Min.
About6Min.
A b o u t
42Min.
A b o u t
53Min.
A b o u t
26Min. About6Min.
Table 2
Program Cleanliness
Normal
Dirty
Rinse only
Preparation
About
60Sec.
Pilot lamp
The indicator for stan-
dard wash blinks.
Washing time
About15Min.
About25Min.
About5Min. About5Min.
About10Min.About5Min.
About5Min.
A b o u t
27Min.
A b o u t
42Min.
About
6Min.
About
60Sec.
About
60Sec.
The indicator for in-tense wash
blinks.The indicator for drying
blinks during drying process.
The indicator for rinse blinks.The indicator for
drying blinks dur-ing drying process.
Standard
wash
Intensive
wash
Rinse
Standard
washing
+drying
Intensive
washing
+drying
Rinse
+drying
About
60Sec.
About
60Sec.
The indicator for in-
tense wash blinks.
The indicator for rinse
blinks.
Duration
Wash Rinse 1 Rinse 2
KUK GB