Hotpoint HDA850G - Manual (Page 5)

●
For PLATE WARMER cycle:
a.
b.
c.
Load clean plates and dishes to
be warmed.
Select DRYING HEAT–ON
drying option.
the door unlatched.
d. Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
e. Latch the door to start the
What in each cycle
POTS & PANS 12.6
NORMAL WASH 10.7
LIGHT WASH 9.2
RINSE HOLD 3.6
Cycle selection hints
is important to follow the loading
instructions on pages 8 and 9.
& PANS—For items such as
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes
that have been pre-rinsed before
loading. Also, for washing
lightly soiled dishes with soils
that have not dried on.
RINSE HOLD—For rinsing
partial loads which will be washed
later. Select DRYING
OFF drying option.
use
detergent.
PLATE WARMER—For warming
clean dishes and serving plates for
the serving of hot food.
Minimum
Wash
Cycle Time
minutes) Cycle Sequence
55*
55*
55*
10
●
You’ll hear occasional clicking
●
During the drying period:
sounds:
—The motor stops.
–Soft food disposer shredding
—Water vapor is released through
action.
the vent under the door handle.
—Drain valve opening to pump It maybe visible.
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
5
*DRYING HEAT—ON:
Add