Hunter Fan 41953-01 - Manual (Page 18)

41953-01 02/15/2008
18
E4
K
M
N
E6
E7 E8
O
position the strain relief bracket between the plugs as
shown, and screw into place.
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
Align glass dome and push up. Install 2 Max 60 Watt A15 bulbs (Not Included).
E3
M
Connect wiring harness. DO NOT ALLOW THE FIXTURE TO
HANG FROM THE WIRING HARNESS.
E5
M
Align posts A, B, C and D (stamped into motor housing)
with posts A, B, C and D (stamped into light fixture).
Slide light fixture over posts.
023_41953_EngS_2-15-08.indd 18 2/16/08 12:25:46 PM