beautypg.com

Dryer description, Control panel – Hotpoint CTD80 User Manual

Page 5

background image

Installation

Description

Star

t and

Pr
ogrammes

Laundr

y

W
arnings and

Sug

g

estions

Maintenance and

Care

T

roub

leshooting

Ser

vice

GB

3

The

Clean Filter

icon reminds you to

clean the filter every time you use the dryer (

see

Maintenance

).

The

On/Off

indicator light signals that your dryer

is in use or ready to select a programme.

The

ON/OFF

button : If the dryer is running and

this button is pressed, the dryer stops. Press again,
the dryer restarts. If you have not opened the door,
press START button to continue.

The

Progress

icons :

show you the status of the programme. They show
each stage of the programme by the corresponding
icon turning on (

see Start and Programmes

).

The

PROGRAMME Selection

buttons sets the

programme: press the button corresponding with the
programme you want to select (

see Start and

Programmes

).

The

START/CANCEL

button starts a selected

programme. When you press this button there will be
one short beep and the progress icons will flash
on/off to confirm the action. If you have not set a
programme, the buzzer will beep four times. When a
programme is running, holding this button in gives one
long beep and cancels the programme and stops the
dryer (

see Start and Programmes

).

The

OPTION

buttons/icons: these buttons select

available options for your selected programme (

see

The Controls

). The icons indicate that the option has

been selected.

The

Empty Water

icon signals that the

water container should be emptied. When it is flashing
it indicates that the container is full.
The light will take a few seconds to go out after
replacing the empty container, the dryer must be
running for this to happen (

see The Controls

).

Control panel

Dryer Description

PROGRAMME Selection

Buttons

START/CANCEL

Button

OPTION

Buttons

Time and Icon

Display unit

On/Off

Light

ON/OFF

Button

To open the door

The features

Press and release the front

panel in position shown

Water container

Air intake
grille

Rating plate

Door catch

Filter

Door latch

Model &
Serial
numbers

Condenser cover handle

(Pull to open)

Condenser cover

This manual is related to the following products: